E.A.T. E-Glo S Tube Phono Preamplifier

E.A.T. E-Glo S Tube Phono Preamplifier

Elegant high-end tube phono pre-amplifier with ultra slim design!

E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors.

RIAA curve is equalised fully passive and splitted in two steps which allows to achieve perfect impedance matching between the gain stage and equalization block. Phono preamplifier doesn't have any global feedback. It has a massive aluminium chassis, large possibility of adjusting the impedance, capacity and gain. It has subsonic filter with mild effect which doesn't affect audible frequencies in unpleasant way.

A very important part is the advanced power supply that uses anode voltage regulation and a well filtrated voltage. Filtration is in three steps, this result is a perfect S/N ratio and undisturbed musical experience.

E.A.T. E-Glo S Tube phono preamplifier technical information

Input impedanceMC 10,25,50,75,100,1000 Ohm
Load capacity50,100,150,200,270,320,420 pF
Output impedance100 ohms
Load capacity50,100,150,200,270,320,420 pF
Gain MM45 dB
Gain MC45,50,55,65,70 dB
RIAA accuracywithin 0,5dB/20Hz – 20kHz
Subsonic18 dB / Octave
Power supplyDC18V/1
Dimensions W × H × D435 × 90 × 270 mm


  • E.A.T. E-Glo S review by SoundStage! Ultra I've harped in this review on the tube-like sound of the European Audio Team's E-Glo S phono stage – to me, its most prominent feature.
  • E.A.T. E-Glo S review by HomeTheaterHifi.com This I will tell you with a straight face, there is a difference sonically that once you hear how greatly the hybrid E-Glo S sounds and elevates your system, you may not think twice about the upgrade and cost.


EuropeanAudioTeam.com » High Performance Audio » Amplifiers & Phono Stages » Phono Stages » E.A.T. E-Glo S Tube Phono Preamplifier