EAT E-Glo S Tube Phono Preamplifier

Products » EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier

Elegant high-end tube phono pre-amplifier with ultra slim design!

E-glo S – is a hybrid phono preamplifier that utIlizes ECC83 tubes (twin triode) in the first and second gain stages In order to get higher gain and lower noise we use in the first stage a cascode connection of tube with with two paralelly connected low-noise J-FET transistors.

RIAA curve is equalised fully passive and splitted in two steps which allows to achieve perfect impedance matching between the gain stage and equalization block. Phono preamplifier doesn’t have any global feedback. It has a massive aluminium chassis, large possibility of adjusting the impedance, capacity and gain. It has subsonic filter with mild effect which doesn’t affect audible frequencies in unpleasant way.

A very important part is the advanced power supply that uses anode voltage regulation and a well filtrated voltage. Filtration is in three steps, this result is a perfect S/N ratio and undisturbed musical experience.

EAT E-Glo S Tube phono preamplifier technical information
Input impedanceMC 10,25,50,75,100,1000 Ohm
Load capacity50,100,150,200,270,320,420 pF
Output impedance100 ohms
Load capacity50,100,150,200,270,320,420 pF
Gain MM45 dB
Gain MC45,50,55,65,70 dB
RIAA accuracywithin 0,5dB/20Hz – 20kHz
Subsonic18 dB / Octave
InputRCA
OutputRCA
Power supplyDC18V/1
Dimensions W × H × D435 × 90 × 270 mm
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier
EAT E-Glo S Tube Phono Preamplifier